Processor Rollers - Kodak DryView 5800 Service Manual

PROCESSOR ROLLERS

Prerequisites:
To Remove:
ROLLER
BEARING
To Install:
2G0947 - 31JAN08
Remove the "PROCESSOR
IMPORTANT
:
The BEARINGS on the ends of each ROLLER are loose. Take care not to lose
the BEARINGS or the SPRINGS in the RETAINER.
1. Lift each ROLLER from the RETAINER.
2. Install a BEARING on each end of the ROLLER, and make sure each
RETAINER includes a SPRING.
3. Insert the BEARINGS (with ROLLER) into the RETAINER.
4. Check that:
a. Each ROLLER rotates freely.
b. Each BEARING is free to slide against the SPRING in the
RETAINER.
c. The SPRINGS are not bent.
Adjustments and Replacements
COVER".
PROCESSOR COVER
SPRING
RETAINER
3-37