Energizing the IMAGER
De-energizing the IMAGER
2G0947 - 31JAN08
RISK OF ELECTRIC SHOCK
Dangerous voltage present.
1. Check that the AC POWER CORD is connected into the back of the
IMAGER and into the wall OUTLET.
CAUTION
:
Double Pole/Neutral Fusing.
2. Press the POWER SWITCH on the IMAGER to the ON position.
CAUTION
:
Double Pole/Neutral Fusing.
1. Press the POWER SWITCH on the IMAGER to the OFF position.
RISK OF ELECTRIC SHOCK
Dangerous voltage present.
2. Disconnect the AC POWER CORD from the wall OUTLET.
Installation Instructions
:
:
2-3