2G0947 - 31JAN08
One of the following single-phase, 15 A power sources, with grounding, must
be provided within 2.5 m (8 ft) of the Imager.
•
120 V AC +6% to -10%, 60 Hz ±3Hz
240 V AC ±10%, 50 Hz ±3Hz
•
250 V AC ±10%, 50/60 Hz ±3Hz
•
The wire must be insulation-rated for 600 V. A dedicated line is recommended.
NETWORK
CONNECTOR
12. Connect:
•
the POWER CORD, to the AC power CONNECTOR on the
IMAGER.
•
the POWER CORD to the building AC power OUTLET.
•
one end of the NETWORK CABLE to the IMAGER.
•
the other end of the NETWORK CABLE to the customer's network.
Installation Instructions
AC POWER
CONNECTOR
2-11