Kodak DryView 5800 Service Manual page 244

Diagnostics
Condition Code: 28-551
Web Portal Message
Processor Heater Failure
Condition Code: 28-554
Web Portal Message
Processor Over Temperature
5-96
Log Message
Processor failed to warm up
when heater turned on
Description
This error occurs if the PROCESSOR RTD indicates that the temperature is not
rising at the expected rate. This error shuts down the PROCESSOR DRUM
HEATER. The error clears only when power is cycled.
System Impact
The printer is unable to print films. The spooler is still able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted.
User Action
1. Shut down the IMAGER, then start the IMAGER.
2. If the error persists, call for service.
FE Action
Log Message
Processor Over Temperature
Description
This error occurs if the PROCESSOR RTD indicates that the temperature is
higher than the limit. This error shuts down the PROCESSOR DRUM
HEATER. The error clears only when power is cycled.
System Impact
The printer is unable to print films. The spooler is still able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted.
User Action
1. Shut down the IMAGER, then start the IMAGER.
2. If the error persists, call for service.
FE Action
DICOM Message
PROC DOWN 0-Fatal
DICOM Message
PROC DOWN 0-Fatal
2G0947 - 31JAN08
Severity
Severity