Adjustments and Replacements
MOTOR, PICKUP DRIVE - UPPER (M3U) and LOWER (M3L)
Prerequisites:
To Remove:
PICKUP DRIVE
MOTOR
BASE
To Install:
3-78
Remove the
"PICKUP AY - UPPER"
IMPORTANT
:
This procedure is used for both UPPER and LOWER PICKUP AY.
CONNECTOR
4 SCREWS
VACUUM BAR AY
1. Grip the BASE and VACUUM BAR AY and gently pull to extend the
PICKUP AY to full length.
2. Disconnect the CONNECTOR.
3. Remove:
•
2 E-RINGS
•
2 GEARS
•
4 SCREWS
•
PICKUP DRIVE MOTOR
1. Reverse the steps in the removal procedure.
or
"PICKUP AY -
LOWER".
2 E-RINGS
2 GEARS
2G0947 - 31JAN08