Kodak DryView 5800 Service Manual page 144

Preventive Maintenance
4-8
19. Clean and inspect:
•
PROCESSOR COVER ROLLERS
•
HEAT SHIELD SUPPORT BARS
•
DENSITOMETER GUIDE
•
DENSITOMETER GUIDE ROLLERS
20. Vacuum:
•
TOP COVER
•
FRONT PANEL
•
entire PROCESSOR AY
21. Remove the used piece of film from the top of the OPTICS AY.
NOTE:
Be careful not to spill loose debris resting on top of the film. Discard
the film and debris.
22. Install:
•
PROCESSOR DRUM
•
RIGID DUCT
IMPORTANT
:
Install a new FELT PAD AY every PM (20,000 cycles) and a new FILM
DIVERTER AY every other PM (40,000 cycles).
PROCESSOR COVER
ROLLERS
2 HEAT SHIELD
SUPPORT BARS
DENSITOMETER GUIDE
ROLLERS
2G0947 - 31JAN08