Kodak DryView 5800 Service Manual page 235

Condition Code: 27-604
Web Portal Message
Optics: Calibration Failed
Condition Code: 27-607
Web Portal Message
Optics: Calibration Failed
2G0947 - 31JAN08
Log Message
Optics calibration failed to
Adjust Laser Dynamic Range
within limits
Description
This error occurs when the laser dynamic range measured by the optics
calibration and diagnostics is outside the predefined valid range after 5
successive adjustment attempts. The error clears when a calibration is requested
or power is cycled.
System Impact
The printer is unable to print films. The spooler is still able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted.
User Action
1. Shut down the IMAGER, then start the IMAGER.
2. If the error persists, call for service.
FE Action
Log Message
Optics calibration detected
Optics Maximum Power outside
valid range
Description
This error occurs when the maximum laser power measured by the optics
calibration and diagnostics is outside the predefined valid range. The error clears
when a calibration is requested or power is cycled.
System Impact
The printer is unable to print films. The spooler is still able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted.
User Action
1. Shut down the IMAGER, then start the IMAGER.
2. If the error persists, call for service.
FE Action
DICOM Message
ELEC DOWN 0-Fatal
DICOM Message
ELEC DOWN 0-Fatal
Diagnostics
Severity
Severity
5-87