Chapter 1. Getting Started
Determining Cue Distance and Cue Delay
Determining Cue Distance and Cue Delay
1 - 10
The cue sensor and tach encoder, each mounted on the document
transport, are required for proper printing.
The information provided by these devices determines when printing
occurs.
Tach and cue installation are application specific. See the Installation
Guide for general installation guidelines.
Tach Encoder
The tach encoder generates pulses that indicate the travel distance and
speed of the transport (Figure 1.7). The tach rate must match (or be a
multiple of) the print resolution being used. (See your system software
operator's manual for details on selecting print resolution and tach rate.)
Figure 1.7
Tach encoder