Kodak DryView 5800 Service Manual page 238

Diagnostics
Condition Code: 27-646
Web Portal Message
Optics: Internal Hardware
Failure
Condition Code: 27-650
Web Portal Message
Optics: Internal Hardware
Failure
5-90
Log Message
Optics hardware failed to report
start of page although Start of
Page sensor (S8) detected film.
Description
This error occurs if the optics hardware does not report the start of page
condition even though the START OF PAGE (SOP) SENSOR (S8) did indicate
the leading edge of the film has been detected. The image is likely blank, but the
film is not jammed and can likely be transported out of the IMAGER
successfully. The error clears only when power is cycled.
System Impact
The printer is unable to print films. The spooler is still able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted.
User Action
1. Shut down the IMAGER, then start the IMAGER.
2. If the error persists, call for service.
FE Action
Log Message
Image Exposure time out failure
-- multiple successive timeouts.
Description
This error occurs when the image exposure does not complete in the required
time for 3 successive films. The error is cleared when the IMAGER power is
cycled.
System Impact
The printer is unable to print films. The spooler is still able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted.
User Action
1. Shut down the IMAGER, then start the IMAGER.
2. If the error persists, call for service.
FE Action
DICOM Message
ELEC DOWN 0-Fatal
DICOM Message
ELEC DOWN 0-Fatal
2G0947 - 31JAN08
Severity
Severity