Kodak DryView 5800 Service Manual page 94

Adjustments and Replacements
To Install:
3-52
IMPORTANT
Cut TIE WRAPS that secure the FILM TRANSPORT HARNESS to the
IMAGER FRAME AY
FILM FEED AY
8. Remove 6 SCREWS.
IMPORTANT
Remove slowly, moving electrical harnesses out of the way.
9. Slide the FILM FEED AY out the left side of the IMAGER and place it
on a flat, stable surface.
IMPORTANT
To prevent damage to CABLES, install new TIE WRAPS in place of those that
were cut.
1. Reverse the steps in the removal procedure.
:
6 SCREWS
:
:
2G0947 - 31JAN08