Doing the Configuration
Setting the Language
Checking the Values for the DICOM Source Communications
2G0947 - 31JAN08
IMPORTANT
:
You must restart the IMAGER from the SERVICE TOOL in order to
permanently save configuration information.
IMPORTANT
:
The language is set by the customer in the WEB PORTAL.
1. Connect the LAPTOP COMPUTER to the IMAGER.
2. Select Configuration>DICOM SCP>Communications.
3. Check:
•
"Port Number" is 5040
•
"Association Limit" is 12
4. Are the values correct?
Yes
Continue with
"Setting the
IMAGER to be a
a. Click [Modify].
Destination".
b. Type the correct values.
c. Click [Save].
d. Continue with
IMAGER to be a
Installation Instructions
No
"Setting the
Destination".
2-13