Kodak DryView 5800 Service Manual page 193

Condition Code: 20-154
Web Portal Message
MCS: Internal Communications
Failure
2G0947 - 31JAN08
Log Message
MCS failed to read/write to the
hard drive.
Description
This error occurs when the Machine Control System (MCS) application reports
that it has detected an error while attempting to read or write from its storage
space on the HARD DRIVE. The error clears only when power is cycled.
System Impact
The printer is unable to print films. The spooler is still able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted.
User Action
1. Shut down the IMAGER, then start the IMAGER.
2. If the error persists, call for service.
FE Action
Do the actions below in sequence. If an action provides a resolution, do not
continue with the other actions.
1. De-energize then energize the LASER IMAGER.
2. Re-ghost the IMAGER.
3. Install a new HARD DRIVE (see Adjustments and Replacements,
"HARD DRIVE" on page
4. Install a new DRE MOTHERBOARD (see Adjustments and
Replacements, "DRE MOTHERBOARD" on page
DICOM Message
ELEC DOWN
3-89).
Diagnostics
Severity
0-Fatal
3-92).
5-45