Kodak DryView 5800 Service Manual page 241

Condition Code: 28-154
Web Portal Message
Processor: Internal
Communications Failure
Condition Code: 28-155
Web Portal Message
Processor: Internal
Communications Failure
2G0947 - 31JAN08
Log Message
Processor microcontroller failed
to read/write to NVRAM
Description
This error occurs when the MICROCONTROLLER reports that it has detected
an error while attempting to read or write from its NVRAM. The error clears
only when power is cycled.
System Impact
The printer is unable to print films. The spooler is still able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted.
User Action
1. Shut down the IMAGER, then start the IMAGER.
2. If the error persists, call for service.
FE Action
Log Message
Invalid Processor parameters
read from NVRAM
Description
This error occurs during initialization when the setpoint or offset parameters
read from NVRAM are outside their allowable values. This error is caused by
loading incorrect parameters into NVRAM or by an NVRAM error. The error
clears only when power is cycled.
System Impact
The printer is unable to print films. The spooler is still able to accept and queue
jobs but new films will not be initiated. Films downstream of the affected
subsystem will be completed. All other films will be reprinted.
User Action
1. Shut down the IMAGER, then start the IMAGER.
2. If the error persists, call for service.
FE Action
DICOM Message
ELEC DOWN 0-Fatal
DICOM Message
PROC DOWN 0-Fatal
Diagnostics
Severity
Severity
5-93