PROCESSOR COVER
Prerequisites:
To Remove:
To Install:
2G0947 - 31JAN08
Remove the
"BACK
PANEL".
CAUTION
:
Hot Surface
When the IMAGER is initially de-energized, the PROCESSOR
DRUM and ROLLERS are hot. Take care when working in the area
of the PROCESSOR.
PROCESSOR COVER
1. Unlatch the 2 LATCHES.
2. At the back of the IMAGER, use a 2.5 ALLEN WRENCH to remove 2
SCREWS.
3. Lift the PROCESSOR COVER and place it on a flat, stable surface.
1. Reverse the steps in the removal procedure.
Adjustments and Replacements
2 SCREWS
Back of IMAGER
2 LATCHES
3-29