Kodak DryView 5800 Service Manual page 270

Diagnostics
Log Keying
Functions
5-122
1. Start - Click [Start] at any time to display parameters for retrieving a new log.
The Log Retrieval screen will display.
•
If you have the approximate time at which an error occurred, select "View
Log With Time Range", and enter a Start Time and End Time which will
include the time of the event you want to review. Then click [OK].
•
If you want to view the log during the time an event occurs:
– select "View Active Log"
– click [OK]
2. Stop - Click [Stop] at any time during the time a log is loading to stop the
loading process.
3. Load - Click [Load]
4. Save - Click [Save] to save a log to a folder on your LAPTOP.
•
Use the cursor to select the area of the log you want to save.
•
Select the folder on the LAPTOP, for example Log Files.
•
Enter a File name and click [Save].
5. ? - Click the question mark to display a help screen.
6. Options - Click [Options] to display a screen of the log columns you want to
display.
•
Select the name of each column you want to display in the log. The
columns selected above are of the most use for your purposes.
•
Click [OK] to display the log.
7. Find - Click [Find] to search for an area in the log that you can identify by
words or numbers, for example, an error code.
•
Enter the combination of words and numbers you want to locate in the Find
what window.
•
Click [Find] to search the log.
8. Find Next - Click [Find Next] to locate the next entry from the Find operation.
Note:
Your LAPTOP must have LOCAL LOG VIEWER SOFTWARE to view the
logs.
9. Display Filter - Click [Display Filter] to display a screen that will allow you to
filter the log to decrease the quantity of log data for analytical use.
2G0947 - 31JAN08