BEARING
3 BELTS
2G0947 - 31JAN08
2 E-RINGS
ROLLERS
DRIVE
SHAFT
PULLEY
TURNAROUND
DRIVE BELT
4. Slide the 3 BELTS off the ROLLERS.
5. Disengage the TURNAROUND DRIVE BELT from the PULLEY.
6. Remove:
•
2 E-RINGS (1 on the outside of the PULLEY and 1 from inside the
FRAME)
•
PULLEY
7. Push the DRIVE SHAFT to the right to disengage it from the BEARING
on the left side of the FRAME, then to the left to remove it.
Adjustments and Replacements
3-43