Kodak DryView 5800 Service Manual page 151

LOCAL PANEL Icons
2G0947 - 31JAN08
Icon Description
This icon indicates that film calibration is required. The IMAGER is unable to
print jobs from this supply until a successful calibration occurs.
This icon indicates that a COVER or PANEL is open on the IMAGER.
This icon indicates an error with the FILM TRAY. An error code will also be
shown. The FILM TRAY cannot be used until the error is corrected.
This icon indicates that you should insert the FILM SAVER into the FILM
TRAY.
This icon appears when the film fails calibration and indicates that the IMAGER
has been placed in "Manual mode".
This icon indicates that the DICOM network connection to the IMAGER is
offline.
This icon indicates that a FILM TRAY is not installed. Both FILM TRAYS must
be installed in order for the IMAGER to operate.
This icon indicates that a user-initiated shutdown is complete. The IMAGER
can now be powered OFF.
This icon indicates that preventive maintenance is due.
This icon indicates that one or more jobs are present in the "Undeliverable Jobs
Queue".
This icon indicates that the FILM SAVER must be removed from the FILM
TRAY.
This icon indicates that a reset of the print counts to preventive maintenance is
due.
This icon indicates there are prints in the "Undeliverable Jobs Queue" that are
waiting to be deleted.
This icon indicates that a user-initiated system restart is in process.
This icon indicates that the IMAGER has been placed in "Service mode".
This icon indicates that the IMAGER is warming up. The amount of time
remaining until the IMAGER reaches operating temperature is also shown.
Diagnostics
5-3