Loading Customer Film; Checking The Installed Hardware And Film Type - Kodak DryView 5800 Service Manual

Loading Customer Film

Checking the Installed Hardware and Film Type

2G0947 - 31JAN08
5. Select Utilities>Session>Restart.
6. Click [Restart].
Wait for the IMAGER to restart.
7. Continue with "Loading Customer
1. Load customer film into the FILM SUPPLY.
2. Install the FILM SUPPLY.
3. Continue with "Checking the Installed Hardware and Film
1. Select Configuration>Hardware>Installed Hardware.
2. Under Film Options, for Clear, Blue, Blue Plus, and CE Mark, select YES
or NO from the drop-down menu.
3. Click [Save].
4. Continue with "Doing the SCP Services
Installation Instructions
Film".
Type".
Configuration".
2-21