Condition Code: 21-131 Or - Kodak DryView 5800 Service Manual

Condition Code: 21-131 or 23-131

Web Portal Message
xxxxx Supply: Internal
Hardware Failure
2G0947 - 31JAN08
Log Message
xxxxx Supply: Film did not
release from cups after pickup,
as indicated by Film Separation
Sensor (S3x)
Description
This error occurs only while attempting to pick up a film. The FILM
SEPARATED SENSOR (S3x) indicates that the film has not released from the
CUPS at the end of the film pickup cycle. The error is cleared when a FILM
TRAY is re-inserted after being removed.
System Impact
One or more feed magazine(s) is unable to print. The spooler is still able to
accept and queue jobs and continue printing from any other available supply
tray.
User Action
1. Cover the FILM TRAY with the FILM SAVER.
2. Remove the FILM TRAY from the IMAGER.
3. Re-insert the FILM TRAY and remove the FILM SAVER.
4. Shut down the IMAGER, then start the IMAGER.
5. If the error persists, call for service.
FE Action
DICOM Message
FILM TRANS ERR 1-Alert
Diagnostics
Severity
5-71