Kodak DryView 5800 Service Manual page 53

Decrease the top border on the test print, do:
a. Click [Modify] and decrease the number in the
"Page Start Delay" window by 13. This will
decrease the top border by 1 mm (0.04 in.).
b. Click [Save].
c. Make another Test Print and check the "Page Start
Delay" delay area again.
d. Do Step a through Step c until the top border
matches the bottom border.
2G0947 - 31JAN08
3. To:
Increase the top border on the test print, do:
a. Click [Modify] and increase the number in the "Page
b. Click [Save].
c. Make another Test Print and check the "Page Start
d. Do Step a through Step c until the left border
Adjustments and Replacements
Start Delay" window by 13. This will increase the
top border by 1 mm (0.04 in.).
Delay" delay area again.
matches the right border.
3-11