Kodak DryView 5800 Service Manual page 153

Machine Control System (MCS) Printer Status Messages
Printer
Local Panel Display
Status
Any FILM • Ready LED off
SUPPLY • Supply display is
Open blanked for open
supply
• Status code: 20702
DOOR Open • Ready LED off
• Attention LED on
• Status code: 20701
Failed • Ready LED off
• Error LED on
• Error code shown
IMAGER • Ready LED off
Unlock • Unlock Button/LED
Requested flashing for the
requested FILM
SUPPLY
Offline • Ready LED off
• Attention LED on
• Status code: 20704
Printing • Ready LED flashing
Ready • Ready LED on
• Supply display shows
count, type, and size
for each film supply
Self-test • Ready LED off
• Network LED off
• the display shows the
Carestream Health
logo
Service • Ready LED off
Mode • Attention LED on
• Status code: 20700
2G0947 - 31JAN08
The following table describes how the LOCAL PANEL and Web Portal indicate
printer status to the user.
Table 5-2: MCS Printer Status Messages
Web Portal
Display
Not Ready
Hood Open
Failed
Not Ready
Printing
Disabled
Printing
Ready
Self-test
Service Mode
DICOM Status
WARNING / At least one of the FILM
COVER OPEN SUPPLIES is open (not
inserted and latched into
place.
WARNING / The TOP COVER or
COVER OPEN FRONT PANEL is open or
one of the side PANELS is
removed. The IMAGER is
not "Ready".
See Error Code An error has occurred that
prevents printing.
n/a The printer will complete
any prints in progress.
WARNING / The printer has been
PRINTER disabled.
OFFLINE
NORMAL The IMAGER is currently
printing films.
NORMAL The IMAGER is online and
the PROCESSOR has
reached operating
temperature.
WARNING / This occurs when power is
first applied to the MCS.
PRINTER INIT
WARNING / The SERVICE SWITCH is
PRINTER enabled. The IMAGER is
OFFLINE not "Ready".
Diagnostics
Description
5-5