Auto-Load Delay; Auto-Cut - Kodak 4800 Series Reference Manual

ê
To set margins
1 Press Setup Menu/Paper Option Menu/Margins.
2 Choose Normal or Expanded.
3 Press OK.

Auto-Load Delay

Auto-Load Delay lets you set the time between when the printer senses the media and
when printing starts. This lets you manually reposition the media, if necessary. The
default is 6 seconds, selectable from a range of 1-12 seconds.
ê
To set auto-load delay
1 Press Setup Menu/Paper Option Menu/Auto-Load Delay.
2 Choose the delay time.
3 Press OK.

Auto-Cut

When the Auto-Cut option is set to On, the printer automatically cuts the media when the
image is complete. To be sure the image is dry before cutting, turn on the dryer and/or
specify an auto-cut delay time. See "Auto-Cut Delay" in this chapter for the procedure.
You can select Cut from the control panel at any time to cut the media.
Note: Automatic cutting is disabled when the paper feed option is set to TAKEUP.
ê
To set auto-cut
1 Press Setup Menu/Paper Option Menu/Auto-Cut Menu/Auto-Cut.
2 Choose On or Off.
3 Press OK.
Reference Guide
Printer Options 2-13