Imaging Ay - Alignment - Kodak DryView 5800 Service Manual

IMAGING AY - Alignment

Adjustment Specification
Purpose:
Specification:
Special Tools:
Prerequisites
To Check
To Adjust
IMAGING AY
2G0947 - 31JAN08
To align the image on the film.
The image is aligned.
None
Remove the "BACK PANEL".
1. Make a test print.
2. Check that the image is not skewed on the film.
SPRING AY
ALIGNMENT PIN
(down position)
1. Loosen the ALIGNMENT PINS using a 1.5 mm Allen WRENCH.
2. Push the ALIGNMENT PINS into the up position.
3. Tighten the ALIGNMENT PINS using a 1.5 mm Allen WRENCH.
4. Turn the 2 SPRING AYs until the IMAGING AY is just touching the
ALIGNMENT PINS.
5. Loosen the ALIGNMENT PINS.
Adjustments and Replacements
ALIGNMENT PIN
(up position)
3-5