Adjustments and Replacements
LOCAL PANEL AY
Prerequisites:
To Remove:
ELECTRONICS BOARD
CONTROL PANEL
To Install:
3-18
Remove the
"FRONT
PANEL".
FRONT PANEL
CONNECTOR
1. Disconnect the CONNECTOR.
2. Remove 6 SCREWS holding the CONTROL PANEL, ELECTRONICS
BOARD and LIGHT SHIELD to the FRONT PANEL.
3. Cut the TIE WRAPS.
IMPORTANT
:
To prevent damage to CABLES, install new TIE WRAPS in place of those that
were cut.
1. Reverse the steps in the removal procedure.
LIGHT SHIELD
6 SCREWS
2G0947 - 31JAN08