NEC Univerge SV8100 Features And Specifications Manual page 482

Issue 12.0
Program
Program Name
Number
22-17-01 Dial-In Conversion Table Area
Setup for Time Pattern –
Received Dial
22-17-02 Dial-In Conversion Table Area
Setup for Time Pattern – Start of
Time
22-17-03 Dial-In Conversion Table Area
Setup for Time Pattern – End of
Time
22-17-04 Dial-In Conversion Table Area
Setup for Time Pattern – Dial-In
Conversion Table
Number
22-17-05 Dial-In Conversion Table Area
Setup for Time Pattern – Day of
Week
Operation
DID calls ring extensions like normal trunk calls.
To Activate DID Call by Time Schedule:
1. At any display multiline terminal, press Speaker.
2. Dial the Dial-In Mode Switching Service Code (Default = Not assigned).
- OR -
Press the Dial-In Mode Switching Programmable Function key (Program 15-07-01, 88, or SC 751
Key Code 88).
3. Dial 1~100 (Version 6000 or lower)/ 500 (Version 7000 or higher) (table number).
2 - 452
Description/Comments
Define the received numbers for
each Dial-In Conversion Table
(Program 22-17-02, 22-17-03 and
22-17-04).
Define the Starting Time for each
DID Translation table in Program
22-17-01.
Define the Ending Time for each
DID Translation table in Program
22-17-01.
Assign each time pattern to a DID
Translation Table Entry in Program
22-11.
Assign day of week for each DID
conversion table.
UNIVERGE SV8100
Assigned Data
1
Up to eight digits
(default not assigned)

0000~2359

(Time)
(default = 0000)
0000~2359

(Time)
(default = 0000)
0~2000
(default = 0)

1-8
1: Sunday
2: Monday
3: Tuesday
4: Wednesday
5: Thursday
6: Friday
7: Saturday
8: Holiday
(default = 1: On (1-8))
Direct Inward Dialing (DID)
Level
2 3
