FRONT ABS WHEEL-SPEED SENSOR
FRONT ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION
NOTE:
If there is any malfunction in the front ABS wheel-speed sensor unit, replace the wheel hub component.
•
1. Remove the mudguard.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
1 Connector
2 Bolt
3 Front ABS wheel-speed sensor wiring harness
FRONT ABS WHEEL-SPEED SENSOR INSPECTION
Installation Visual Inspection
1. Inspect the following items:
If there is any malfunction, replace the applicable part.
•
b. Excessive play of the ABS wheel-speed sensor
c. Deformation of the ABS wheel-speed sensor
(w)
RX8 - Brakes
Page 40