System board and components
14.4.1.4 Concluding steps
Perform the following procedures:
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
"Connecting the server to the power source" on page 81
Ê
"Enabling BitLocker functionality" on page
Ê
14.4.2 Removing the onboard SAS enabling key
Field Replaceable Units (FRU)
Average task duration: 5 minutes
14.4.2.1 Required tools
Preliminary and concluding steps: tool-less
●
Removing the onboard SAS enabling key: tool-less
●
14.4.2.2 Preliminary steps
Perform the following procedures:
"Disabling BitLocker functionality" on page 85
Ê
"Locating the defective server" on page 56
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting power cords" on page 66
Ê
"Extending the server out of the rack" on page 69
Ê
484
Upgrade and Maintenance Manual
77.
107.
RX300 S7