Concluding Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Accessible drives
Figure 216: Removing the RDX/DAT drive in the drive cage
Ê Pull the RDX/DAT drive out of the bay.
Ê Install two 3.5-inch HDD dummy modules as described in section
a 3.5-inch HDD dummy module" on page 144

12.9.5 Concluding steps

Perform the following procedures:
"Installing the fan box" on page 184
Ê
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
"Connecting the server to the power source" on page 81
Ê
368 Upgrade and Maintenance Manual
77.
"Installing
RX300 S7