Installing The Bbu Holder Onto The Air Duct - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 100: Installing the BBU in the BBU holder (example B)
Ê At a slight angle, fit the BBU under the right retaining bracket on the BBU
holder (1).
Ê Fold down the BBU until it locks in place (2).
9.5.1.4

Installing the BBU holder onto the air duct

I
There are different BBUs available. The position of the BBU cable on the
BBU can differ from the following example.
230 Upgrade and Maintenance Manual
RX300 S7