Installing An Odd; Concluding Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Accessible drives

12.5.5 Installing an ODD

Figure 200: Installing the ODD
Ê Run the SATA and power cables through the ODD bay opening as shown.
Ê Connect the SATA cable to the ODD (1).
Ê Connect the power cable to the ODD (2)
Ê Insert the ODD into the bay and push in until it locks in place (3).

12.5.6 Concluding steps

Perform the following procedures:
"Installing the fan box" on page 184
Ê
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
350 Upgrade and Maintenance Manual
RX300 S7