Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual page 174

Hard disk drives / solid state drives
Figure 73: Connecting cables to the 12x 2.5-inch HDD SAS backplane
Ê Reconnect all cables to the 12x 2.5-inch HDD SAS backplane:
– Power cable (C4) connected to SAS backplane connector X15
– Power cable (C5) connected to SAS backplane connector X17
– SAS cable (C9) connected to SAS controller connector MLC1 to primary
backplane connectors X1
– SAS cable (C9) connected to SAS controller connector MLC2 to
secondary backplane connectors X2
I
For a complete cabling overview, please refer to section
overview" on page
174
525.
Upgrade and Maintenance Manual
"Cables
RX300 S7