Shutting Down The Server - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

4.3

Shutting down the server

V
CAUTION!
For further safety information, please refer to chapter
information" on page
I
This step is only required when upgrading or replacing non-hot plug
components.
Ê Inform the system administrator that the server will be shut down and put
offline.
Ê Terminate all applications.
Ê Verify if your backup software solution requires preparative configuration
before starting the procedure as described in section
configuring the backup software solution" on page
Ê In case of Multipath I/O environments, please refer to section
server maintenance in a Multipath I/O environment" on page
Ê Remove all backup and optical disk media from backup and optical disk
drives as described in section
page 89.
Figure 8: Power button on the front panel
RX300 S7
43.
"Removing backup and optical disk media" on
Upgrade and Maintenance Manual
Basic hardware procedures
"Important
"Verifying and
89.
"Note on
90.
65