Installing An Rdx/Dat Drive In The Cage - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

12.8.3 Installing an RDX/DAT drive in the cage

I
– A drive cage is installed
Ê Remove the drive cage see section
page
Ê Remove the dummy drive.
– 3.5-inch HDDs or 3.5-inch HDD dummy are installed
Ê Remove HDD/HDD dummy 5 and 6 see section
inch HDD dummy module" on page 140
Figure 206: Inserting the RDX/DATdrive
Ê Insert the RDX/DAT drive into the cage and push in.
RX300 S7
366.
Upgrade and Maintenance Manual
Accessible drives
"Removing the drive cage" on
"Removing a 3.5-
359