Preparing The Sas Raid Controller - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
Ê Open the server cover as described in section
on page 72 .
9.6.1.3

Preparing the SAS RAID controller

I
To connect an FBU to the controller D3116 you need a TFM. Other
controllers so as D9285 can be connected directly.
Figure 108: SAS RAID controller and TFM kit
1 SAS RAID controller D3116
2-3 TFM kit including three pre-assembled spacer bolts and three screws
(A3C40137316 / LSZ:L3-25419-01)
242 Upgrade and Maintenance Manual
"Removing the server cover"
RX300 S7