Power supply
6.3
Replacing PSU modules
Customer Replaceable Units (CRU)
Average task duration: 5 minutes
6.3.1
Required tools
Preliminary and concluding steps: tool-less
●
Replacing the power supply unit: tool-less
●
6.3.2
Preliminary steps
Perform the following procedures:
"Disabling BitLocker functionality" on page 85
Ê
"Opening the rack door" on page 64
Ê
"Locating the defective server" on page 56
Ê
Ê In non-redundant PSU configurations, shut down the server as described in
section
"Shutting down the server" on page
"Disconnecting power cords" on page 66
Ê
6.3.3
Removing the defective PSU module
Ê Identify the defective PSU module using the server management software.
Ê Remove the defective PSU module as described in section
PSU module" on page
124
122.
Upgrade and Maintenance Manual
65.
"Removing a
RX300 S7