Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual page 516

Conversion configurations
Figure 333: Installing LTO drive
Ê Insert the LTO drive.
Figure 334: Connecting LTO drive cables
Ê Connect the cable C18 to LTO drive (1).
Ê Connect the power cable to the connector of the power cable (2).
Ê Connect the cable C18 to the connector SAS 1-4 of the system board (3).
Ê Insert the SKU/SCU key see section"Installing the onboard SAS enabling
key" on page 482 (4).
516 Upgrade and Maintenance Manual
RX300 S7