Configuration 3 To Configuration 6 - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Ê Route the cables as shown.

15.3.4 Configuration 3 to configuration 6

Replacing the front cages
Figure 335: Replacing front cages (A)
Ê Remove the front panel cable from the system board.
Ê If applicable remove the optional front LAN and front VGA cables from the
system board see sections
page 436 and
Ê Remove the front panel cage.
RX300 S7
"Removing the front LAN connector" on
"Removing the front VGA connector" on page
Upgrade and Maintenance Manual
Conversion configurations
421.
517