Installing A Psu Dummy Module; Concluding Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

6.2.4

Installing a PSU dummy module

Figure 30: Installing a PSU dummy module
Ê Insert the PSU dummy module into the empty PSU slot with the impressed
arrow symbol facing up.
Ê Press in on both locking latches on the PSU dummy module (1) and carefully
insert the dummy module into its slot (2) until it locks in place.
V
CAUTION!
Always install dummy modules into unused PSU slots to comply with
applicable EMC regulations and satisfy cooling requirements.
6.2.5

Concluding steps

Perform the following procedures:
"Connecting the server to the power source" on page 81
Ê
"Closing the rack door" on page 84
Ê
"Enabling BitLocker functionality" on page 107
Ê
RX300 S7
Upgrade and Maintenance Manual
Power supply
123