Concluding Software Tasks - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
"Enabling SVOM boot watchdog functionality" on page
Ê
"Enabling BitLocker functionality" on page
Ê
Ê If applicable, restore LAN teaming configurations as described in section
"After replacing / upgrading LAN controllers" on page
9.4.1.7

Concluding software tasks

If the Modular LAN controller is to be used as a shared LAN interface, please
proceed as follows:
Ê Ensure that the NCSI cable has been connected to the Modular LAN
controller and the system board as described in sections
NCSI sideband cable to the Modular LAN controller" on page 215
"Connecting the NCSI sideband cable to the system board" on page
Ê Enter the BIOS.
Ê Select the Server Mgmt menu.
Ê Under iRMC LAN Parameters Configuration set the Management LAN Port
setting to Shared 2.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify settings,
refer to the "System Board D2939 BIOS Setup Utility" reference manual.
The document is available online at
(http://jp.fujitsu.com/platform/server/primergy/manual/
market).
220 Upgrade and Maintenance Manual
101.
107.
112.
http://manuals.ts.fujitsu.com
for the Japanese
"Connecting the
and
218.
RX300 S7