Concluding Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Accessible drives
Ê Disconnect the SATA cable (1) and the power cable (2).
Ê Remove the ODD latch from the ODD and fix the ODD latch in the bottom of
the front panel module see
Figure 204: Installing the ODD dummy
Ê Insert the ODD dummy.

12.6.4 Concluding steps

Perform the following procedures:
"Installing the fan box" on page 184
Ê
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
"Connecting the server to the power source" on page 81
Ê
354
figure 198 on page
Upgrade and Maintenance Manual
348.
77.
RX300 S7