I/O Panel Indicators - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

The serial connector COM1 can be used as default interface or to communicate
with the iRMC S3.
I
The chipset offers two integrated USB 2.0 Rate Matching Hubs (RMHs).
that enable lower power requirements and manages the transition of the
communication data rate from the high speed of the host controller to the
lower speed of USB full speed / low speed devices.

17.3.2.2 I/O panel indicators

Figure 366: I/O panel indicators
Indicator
LAN
1
link/transfer
2 LAN speed
RX300 S7
Status Description
green on LAN connection established
off no LAN connection
green
data transfer in progress
flashing
yellow on traffic a transfer rate of 1 Gbit/s
green on traffic a transfer rate of 100 Mbit/s
off traffic a transfer rate of 10 Mbit/s
Upgrade and Maintenance Manual
Appendix
553