Removing The Lsd Dummy Cover - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Accessible drives
"Removing the server cover" on page 72
Ê
"Removing the air duct" on page 73
Ê
"Removing the fan box" on page 183
Ê

12.2.3 Removing the LSD dummy cover

Figure 189: Removing the LSD dummy cover
Ê Take the LSD dummy cover plate by the two recessed grips and pull out the
LSD dummy cover plate.
V
CAUTION!
Save the LSD dummy cover plate for future use.
Always replace dummy modules into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.
338 Upgrade and Maintenance Manual
RX300 S7