Replacing The Onboard Sas Enabling Key; Concluding Steps; Replacing The System Board - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

14.4.3.3 Replacing the onboard SAS enabling key

Ê Remove the defective onboard SAS enabling key as described in section
"Removing onboard SAS enabling key" on page
Ê Install the new onboard SAS enabling key as described in section
the onboard SAS enabling key" on page

14.4.3.4 Concluding steps

Perform the following procedures to complete the task:
"Installing the air duct" on page
Ê
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
"Connecting the server to the power source" on page 81
Ê
"Enabling BitLocker functionality" on page 107
Ê
14.5

Replacing the system board

Field Replaceable Units (FRU)
Average hardware task duration: 50 minutes
Average software task duration: 10 minutes
Note on TPM
I
The system board can be equipped with an optional TPM (Trusted
Platform Module). This module enables third party programs to store key
information (e. g. drive encryption using Windows Bitlocker Drive
Encryption).
RX300 S7
74.
Upgrade and Maintenance Manual
System board and components
485.
483.
77.
"Installing
487