Replacing The Front Vga Connector; Required Tools; Preliminary Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY RX300 S7:
Table of Contents

Advertisement

Front panel
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
"Connecting the server to the power source" on page 81
Ê
"Closing the rack door" on page 84
Ê
"Enabling BitLocker functionality" on page 107
Ê

13.2.3 Replacing the front VGA connector

Field Replaceable Units (FRU)
Average task duration: 15 minutes

13.2.3.1 Required tools

Preliminary and concluding steps: tool-less
Replacing the front VGA connector:
– Socket screw driver (5 mm)

13.2.3.2 Preliminary steps

Perform the following procedures:
"Disabling BitLocker functionality" on page 85
Ê
"Opening the rack door" on page 64
Ê
"Locating the defective server" on page 56
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting power cords" on page 66
Ê
"Extending the server out of the rack" on page 69
Ê
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
424
Upgrade and Maintenance Manual
77.
70.
RX300 S7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents