Additional Tasks; Mounting Expansion Card Slot Brackets; Required Tools - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
"Closing the rack door" on page 84
Ê
Ê If applicable, update the firmware of the RAID controller that has been
connected to the FBU as described in section
firmware" on page
"Enabling SVOM boot watchdog functionality" on page 101
Ê
9.7

Additional tasks

This section provides additional expansion card related information on how to
install slot brackets and SFP+ transceiver modules.
I
For further instructions regarding controller settings, please refer to the
accompanying documentation.
9.7.1

Mounting expansion card slot brackets

Upgrade and Repair Units (URU)
Average task duration: 5 minutes
This section provides general instructions on mounting slot brackets as well as
specific instructions for the following network adapters:
"Network adapter D2735" on page 255
●
"Network adapter D2745" on page 257
●
"Network adapter D2755" on page 259
●
"USB 3.0 interface card D3305" on page 261
●
9.7.1.1

Required tools

Preliminary and concluding steps: tool-less
●
Mounting slot brackets:
●
– Phillips PH2 / (+) No. 2 screw driver
254
96.
Upgrade and Maintenance Manual
"Updating RAID controller
RX300 S7