Applying Thermal Paste - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Processors
11.6

Applying thermal paste

Field Replaceable Units (FRU)
Average task duration: 5 minutes
I
– For the Japanese market, the service engineer must follow the
instruction provided separately.
– If the processor upgrade or replacement kit contains a new CPU heat
sink, a thin layer of thermal compound has already been pre-applied
to its lower surface. In this case, please proceed with section
"Installing processor heat sinks" on page
Figure 183: Thermal paste syringe TC-5026
One thermal compound syringe (A3C40142460 / 34035576) contains thermal
paste for three processors.
332 Upgrade and Maintenance Manual
325.
RX300 S7