Installing The Rdx/Dat Drive; Connecting The Rdx/Dat Drive - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Accessible drives

12.11.4 Installing the RDX/DAT drive

Figure 219: Installing the RDX/DAT drive
Ê Insert the RDX/DAT drive with the drive cage in the bay.

12.11.5 Connecting the RDX/DAT drive

I
Notes on RDX drive USB cabling:
– A USB 2.0 RDX drive may be replaced by a USB 3.0 RDX drive with
previous cabling.
– A USB 3.0 RDX drive may be connected with a USB 2.0 cable to an
onboard USB 2.0 connector with limited performance.
– For full performance, connect the USB 3.0 RDX drive to a USB 3.0
interface card by USB 3.0 cable.
– The USB 3.0 cable cannot be connected to a USB 2.0 RDX drive.
374 Upgrade and Maintenance Manual
RX300 S7