Expansion cards and backup units
9.4.2.3
Removing the Modular LAN controller
Figure 97: Detaching the Modular LAN controller
Ê If applicable, remove SFP+ transceiver modules from the Modular LAN
controller, as described in section
on page
268.
Ê Remove the screw (1).
Ê Disconnect the NCSI sideband cable from the system board (2).
Ê Carefully pull up on the Modular LAN controller in a vertical motion and
remove it from its slot (3).
222
"Removing an SFP+ transceiver module"
Upgrade and Maintenance Manual
RX300 S7