Closing The Load Plate - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Processors
Ê Store the processor in a save place for later reuse.
V
CAUTION!
Processors are extremely sensitive to electrostatic discharge and
must be handled with care. After a processor has been removed from
its protective sleeve or from its socket, place it upside down on a
nonconducting, antistatic surface. Never push a processor over a
surface.

11.3.3.3 Closing the load plate

Figure 162: Closing the load plate
Ê Carefully close the load plate over the empty processor socket.
V
CAUTION!
Be careful not to touch or bend the spring contacts on the processor
socket.
308 Upgrade and Maintenance Manual
RX300 S7