Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual page 478

System board and components
Ê Remove the TPM screw (3).
Ê Remove the defective TPM board on the upper side of the system board.
Figure 302: Removing the TPM spacer
Ê Using a small pair of combination pliers, press together the hooks on the
TPM spacer (see close-up) and remove it from the system board.
I
If the TPM module is to be replaced, the TPM spacer may remain on
the system board.
478 Upgrade and Maintenance Manual
RX300 S7